How to set up a Aquaponics system Step by step guide for making a small Aquaponics System using a Bell Siphon.
check our blog for pictures of this project and more:
http://urbangreensurvival.blogspot.com/
Duration : 0:11:40
How to set up a Aquaponics system Step by step guide for making a small Aquaponics System using a Bell Siphon.
check our blog for pictures of this project and more:
http://urbangreensurvival.blogspot.com/
Duration : 0:11:40
USe an iron and …
USe an iron and aluminum foil to heat seal the plastic together again.. give it a try.
If you want the …
If you want the syphon to work even better, you will need to make the neck of the small diameter pipe wider than the rest of it, that way the water volume falling into the pipe is greater than the volume that would fall with a smaller diameter top edge, so when the water reaches the thinner diameter of the pipe it floods the pipe with the extra volume of water and creates the suction it needs to get the syphon started.
To avoid breaking …
To avoid breaking the plastic when drilling, heat up the tip of the drill bit with fire, the drill bit will melt the plastic before it has a chance to break.
Found the same …
Found the same problem with the cheap plastic shattering. I started using a soldering iron to start the holes works fairly well.